- 802.11n compliant with data transfer rates of up to 300 Mbps*
- Two 5 dBi antennas enhance wireless signals for stable data transmission
- Four operating modes to satisfy different needs for wireless coverage extension
- AP/Universal Repeater/Client mode switch simplifies operating mode setup
- One-touch WPS button for wireless security setup
- Two Ethernet ports for connecting wired
Easily Enhance Wireless Coverage for Your Needs
Complying with the 802.11n standard, the ZyXEL WAP3205 v2 Wireless N300 Access Point can enhance wireless speeds up to 300 Mbps* and extend the coverage. With the AP/Universal Repeater/Client mode switch, you can setup the operating modes of WAP3205 v2 according to your needs easily and instantly.
Sharing Internet Access Wirelessly
The 802.11n standard-compliant WAP3205 v2 brings you wireless speeds of up to 300 Mbps* for multimedia streaming. The all-in-one design allows WAP3205 v2 to perform as an AP, a WLAN client, a universal repeater or a Wireless Distribution System (WDS) according to your needs for wireless coverage extension and access sharing.
Simple Operation Modes Setup
You can easily set up the operating modes of WAP3205 v2 to meet your needs through the AP/Universal Repeater/Client mode switch without complicated configuration.
One-Touch WPS Button
The one-touch Wi-Fi Protected Setup (WPS) push button of WAP3205 v2 only takes a few seconds to setup a secured wireless network.
Power on/off switch
Just push the wireless on/off button of WAP3205 v2, you can easily save energy when the device is not in use.
Save unnecessary power consumption and reduce wireless radiation when wireless connection is not in use.
Wireless output management
WAP3205 v2 makes it easy for users to adjust the output power to reduce interference that affects your neighbors.
Wireless Transfer Rate
Receive: 300 Mbps*
Transmit: 300 Mbps*
64/128 bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK
4-in-1 operation modes, including access point, WLAN client, universal repeater, and WDS
Wi-Fi Protected Setup (WPS)
Wi-Fi Multimedia (WMM)
Wireless output power management
Auto channel selection
MAC address filtering
Online firmware upgrade
LAN: Two 10/100 Mbps Ethernet RJ-45 ports with auto MDI/MDIX support
LAN (1 - 2)
Antenna: Two 5 dBi detachable antennas
Switch: AP/Universal Repeater/Client mode switch for setting up operation mode
Wireless on/off button
LED light on/off button
Power rating: 12 V DC, 1 A
Power consumption: 8 watt max.
Item dimensions (W x D x H): 159 x 111 x 23 mm (6.26” x 4.37” x 0.91”)
Item weight: 255 g (0.56 lb.)
Packing dimensions (W x D x H): 247 x 61 x 155 mm (9.72” x 2.4” x 6.1”)
Packing weight: 650 g (1.44 lb.)
Temperature: 0°C to 40°C (32°F to 104°F)
Humidity: 10% to 90% (Non-condensing)
Temperature: -30°C to 70°C (-22°F to 158°F)
Humidity: 10% to 95% (Non-condensing)
Safety: CE LVD
EMC: CE, FCC
Wireless Access Point
Two detachable antennas
Quick start guide